HEIDENHAIN TNC 128 (77184x-01) - Manual (Page 386)

386 Drilling, boring and thread cycles
16.1 F
undamentals
16.1 Fundamentals
Overview
The TNC offers 10 cycles for all types of drilling, boring and threading
operations:
Cycle Soft key Page
240 CENTERING
With automatic pre-positioning, 2nd
set-up clearance, optional entry of the
centering diameter or centering depth Page 387
200 DRILLING
With automatic pre-positioning,
2nd set-up clearance Page 389
201 REAMING
With automatic pre-positioning,
2nd set-up clearance Page 391
202 BORING
With automatic pre-positioning,
2nd set-up clearance Page 393
203 UNIVERSAL DRILLING
With automatic pre-positioning,
2nd set-up clearance, chip breaking,
and decrementing Page 397
204 BACK BORING
With automatic pre-positioning,
2nd set-up clearance Page 401
205 UNIVERSAL PECKING
With automatic pre-positioning,
2nd set-up clearance, chip breaking,
and advanced stop distance Page 405
241 SINGLE-LIP DEEP-HOLE
DRILLING
With automatic pre-positioning to
deepened starting point, shaft speed
and coolant definition Page 409
206 TAPPING NEW
With a floating tap holder, with
automatic pre-positioning, 2nd set-up
clearance Page 416
207 RIGID TAPPING NEW
Without a floating tap holder, with
automatic pre-positioning, 2nd set-up
clearance Page 418