Yaskawa 1000 Series Drive Option - CC-Link Installation - Manual (Page 26)

8 CC-Link Data Table
26 YASKAWA ELECTRIC TOBP C730600 44A YASKAWA AC Drive-Option Card CC-Link Installation Manual
■ Drive → PLC
Table 7 Remote I/O Table (Drive → PLC)
Note: If making frequent setting changes, use RYD (Frequency Reference 1 flag) for setting the
register. Using RYE (Frequency Reference 2 flag) too often can shorten the performance life of
the drive's internal memory.
Device Signal Name Description Default
RX0 Forward Run
ON: Forward Run Command Present (includes
DC Injection Braking)
OFF: No Forward Run Command
–
RX1 Reverse Run
ON: Reverse Run Command Present
OFF: No Reverse Run Command (includes DC
Injection Braking)
–
RX2
Terminals MA, MB,
MC Function
Multi-function output: H2-01 (H2-01 = E: Fault)
RX3 Speed Agree
ON: Output frequency is between frequency
reference and the detection width set to L4-02.
–
RX4 During Stall Prevention – –
RX5 During Undervoltage – –
RX6 Terminal P1 Function Multi-function output: H2-02 (H2-02 = 0: During Run)
RX7 Terminal P2 Function Multi-function output: H2-03 (H2-03 = 2: Speed Agree 1)
RX8, 9 Reserved – –
RXA CC-Link Option Fault Comm. error between drive and CC-Link device –
RXB
Monitoring Motor
Revolutions
ON: Currently monitoring motor revolutions.
Data is stored in remote
register RW
R1
.
RXC Obtain Monitor Data ON: Monitor data has been updated. –
RXD
Frequency Setting
Ready 1 ON: Displays the main frequency reference that
has been set.
–
RXE
Frequency Setting
Ready 2
ON: Displays the data set to d1-01 (Frequency
Reference 1).
Note: Also sets the main
frequency reference at the
same time.
–
RXF
Command Code
Execute Complete
ON: Displayed after the specified command
code has been executed.
RXF signal switches off when the RYF
command is no longer present.
–
RX10
to 19
Reserved – –
RX1A Error ON: Fault occurred on the drive side. –
RX1B Remote Station Ready ON: Drive is ready to operate. –
RX1C to
1F
Reserved – –