Yaskawa SI-EP3 PROFINET Installation - Manual (Page 37)

7 Web Interface
YASKAWA TOEP YEACOM 07A 1000-Series Option PROFINET SI-EP3 Installation Manual 37
■ Parameter Access Tab
The Parameter Access tab allows the user to read and write parameters from the drive. Write
access is restricted until a valid password is entered.
Figure 17
Figure 18 Parameter Access Tab View
The MEMOBUS/Modbus address for the drive parameter being accessed must be entered in
hexadecimal. The number must begin with “0x” to signify hexadecimal.
Clicking “Read” will load and display the current value of the given MEMOBUS/Modbus
Address. Clicking “Set” will save the given value to the given MEMOBUS/Modbus address.
After a “Read” or “Set” command is given, Status will display “Waiting” while the action is
being carried out, then “Complete” is displayed when finished.