Yaskawa E7B Drive Bypass System - Manual (Page 27)

Yaskawa Electric America, Inc.
Installation Guide IG.E7B.02 Rev: 04-11
Date: 11-1-04 Page 25 of 46
Selector Key Indicators
When off these selector key indicators simply mean that the function has not been selected. The table below describes
the operation when these functions are selected and the key indicator is lit.
Normal Control Panel Indicators
Table 1.29 Selector Key Indicators
Selector Key LED Color Function When Lit
Drive Select Green The Drive mode of operation is selected.
Bypass Select Amber The Bypass mode of operation is selected.
HAND Amber The Drive or Bypass is operated via the local control panel. A Run
command is automatic.
OFF Amber The Run command has been removed from the Drive or Bypass.
AUTO Green The Drive or Bypass is operated via a remote device (DDC or BAS).
Drive Test Amber The Drive is operated via the local control panel while the motor is
operating in Bypass mode.
“Auto Run” LED
(Green with Auto Mode & Auto Start)
“Control Power” LED
(Green with Power Applied)
“Drive Select” LED
(Green in Drive Mode)
“Ready” LED
(Green indicates no problems)
“Run” LED
(Green indicates Run Command)
“Auto” LED
(Green in Auto Mode)