Yaskawa E7B Drive Bypass System - Manual (Page 35)

Yaskawa Electric America, Inc.
Installation Guide IG.E7B.02 Rev: 04-11
Date: 11-1-04 Page 33 of 46
Use and keys to scroll through the “Quick Setting” parameter list.
Parameter
Number
Parameter Name
A1-00 Language Selection
b1-01 Frequency Reference Selection
b1-02 Run command Selection
b1-03 Stopping Method Selection
b1-04 Reverse Operation Selection
b5-XX PI Mode Parameters
b8-01 Energy Savings Control Selection
C1-01 Acceleration Time 1
C1-02 Deceleration Time 1
d2-01 Frequency Reference Upper Limit
d2-02 Frequency Reference Lower Limit
E1-01 Input Voltage Setting
E2-01 Motor Rated Current
F6-01 Operation Selection After Communication Error
H3-02 Terminal A1 Gain Setting
H3-03 Terminal A1 Bias Setting
H3-10 Terminal A2 Gain Setting
H3-11 Terminal A2 Bias Setting
L2-01 Momentary Power Loss Detection Selection
L2-02 Momentary Power Loss Ride-thru Time
L4-05 Frequency Reference Loss Detection Selection
L4-06 Frequency Reference Level at Loss Frequency
L5-01 Number of Auto Restarts Attempts
L5-03 Maximum Restart Time After Fault
L6-01 Torque Detection Selection 1
L6-02 Torque Detection Level 1
L6-03 Torque Detection Time 1
L8-11 Heatsink Cooling Fan Operation Delay Time
o1-01 User Monitor Selection
o1-05 LCD Brightness Adjustment
o1-07 Second Line User Monitor Selection
o1-08 Third Line User Monitor Selection
o2-03 User Parameter Default Value
o2-05 Frequency Operation Time Selection
o2-08 Cumulative Operation Time Selection
o3-02 Read Allowed Selection