Yaskawa P7 to P1000 - Manual (Page 45)

13 Appendix 2 Parameter Cross Reference
YASKAWA PL.P1000.01 P7 to P1000 - Product Transition Guide 45
Display
Setting/
Selection
Digital Operator
Display
Selection
o1-03 0 o1-03 0
o1-03 o1-03
0: Hz units 0: 0.01 Hz units
1: % units
(100% = E1-04)
1: 0.01% units
2 to 39: RPM 2: r/min units
40 to 39999: User display
3: User-set units
o1-10
o1-11
1 to 60000 0 to 3
o1-10: Determines how the units for the frequency reference.
o1-11: Sets the decimal point for the frequency reference display
Ex. : For a max output frequency of 200.0, set the following:
Setting value :
o1-03 = 12000
Setting value: o1-03 = 3
: o1-10 = 2000
: o1-11 = 1
1 2 0 0 0
│ └ Max value, excluding decimal point → o1-10= “2000”
└── digits displayed to the right of the decimal → o1-11 = 1
LCD Brightness o1-05 3 — — This parameter is not available in P1000.
User Monitor
Selection Mode
o1-06 0 o1-06 0
o2-06 o2-06
0: 3 Mon Sequential (Displays
next 2 sequential monitors) 0: 3 Mon Sequential (Displays
next 2 sequential monitors)
1: 3 Mon Selectable
(Set by 01-07 and 01-08) 1: 3 Mon Selectable
(Set by 01-07 and 01-08)
Second LIne
User Monitor
Selection
o1-07 2* o1-07 2* *Default setting changes to 38 when b5-01 is set to 1.
Third LIne User
Monitor
Selection
o1-08 3* o1-08 3* *Default setting changes to 24 when b5-01 is set to 1.
Frequency
Reference
Display Units
o1-09 0 o1-09 25
o1-09 o1-09
0: WC:InchOfWater 0: WC (inch of water)
1: PSI:lb/SqrInch
1: PSI
(pounds per square inch)
2: GPM:Gallons/Min
2: GPM
(gallons per minute)
3: F:DegFahrenheit 3: ° F (degrees Fahrenheit)
4: CFM:Cubic ft/Min
4: CFM
(cubic feet per minute)
5: CMH:Cubic M/Hr
5: CMH
(cubic meters per hour)
6: LPH:Liters/Hr 6: LPH (liters per hour)
— 7: LPS (liters per second)
8: Bar:Bar 8: Bar (Bar)
9: Pa:Pascals 9: Pa (Pascal)
10: C:DegCelsius 10: ° C (degrees Celsius)
11: Mtr:Meters 11: Mtr (meters)
— 12: Ft (feet)
—
13: LPM (liters per
minute)
Parameter Name
P7 P1000 Setting
Parameter Default Parameter Default P7 P1000