Switching local/remote modes – Yaskawa VS mini J7 Series User Manual
Page 61
Advertising
61
• Switching LOCAL/REMOTE Modes
The following functions can be selected by switching the LOCAL or REMOTE
mode. To select RUN/STOP commands or frequency reference, change the mode
in advance depending on the following applications.
• LOCAL Mode:
Enables the digital operator for RUN/STOP commands and
FWD/REV run commands. Frequency reference can be set by
volume or
.
• REMOTE Mode:
Run by the n02 setting (operation reference selection).
Frequency reference can be set by n03 (frequency reference selection) setting.
•
How to select LOCAL/REMOTE modes
(When 17 is not set to
any parameters n36 to
n39)
(When 17 is set to any
parameters n36 to n39)
Advertising