Yaskawa AC Drive-P1000 Industrial Fan User Manual
Yaskawa ac drive p1000, Technical manual, Industrial fan and pump drive
Advertising
YASKAWA AC Drive P1000
Industrial Fan and Pump Drive
Technical Manual
MANUAL NO. SIEP YAIP1U 01B
To properly use the product, read this manual thoroughly and retain
for easy reference, inspection, and maintenance. Ensure the end user
receives this manual.
Type: CIMR-PU A
Receiving
Mechanical Installation
Electrical Installation
Start-Up Programming &
Operation
Parameter Details
Troubleshooting
Periodic Inspection &
Maintenance
Peripheral Devices &
Options
Specifications
Parameter List
MEMOBUS/Modbus
Communications
Standards Compliance
Quick Reference Sheet
1
2
3
4
5
6
7
8
A
B
C
D
E
1
2
3
4
5
6
7
8
A
B
C
D
E
Models: 200 V Class: 3/4 to 175 HP ND
400 V Class: 3/4 to 1000 HP ND
600 V Class: 2 to 250 HP ND
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- Quick Reference
- Preface & General Safety
- Receiving
- Mechanical Installation
- Electrical Installation
- Start-Up Programming & Operation
- Parameter Details
- Troubleshooting
- Section Safety
- Motor Performance Fine-Tuning
- Drive Alarms, Faults, and Errors
- Fault Detection
- Alarm Detection
- Operator Programming Errors
- Auto-Tuning Fault Detection
- Copy Function Related Displays
- Diagnosing and Resetting Faults
- Troubleshooting without Fault Display
- Common Problems
- Cannot Change Parameter Settings
- Motor Does Not Rotate Properly after Pressing RUN Button or after Entering External Run Command
- Motor is Too Hot
- oPE02 Error Occurs When Lowering the Motor Rated Current Setting
- Motor Stalls during Acceleration or Acceleration Time is Too Long
- Drive Frequency Reference Differs from the Controller Frequency Reference Command
- Excessive Motor Oscillation and Erratic Rotation
- Deceleration Takes Longer Than Expected with Dynamic Braking Enabled
- Noise From Drive or Motor Cables When the Drive is Powered On
- Ground Fault Circuit Interrupter (GFCI) Trips During Run
- Connected Machinery Vibrates When Motor Rotates
- PID Output Fault
- Insufficient Starting Torque
- Motor Rotates after the Drive Output is Shut Off (Motor Rotates During DC Injection Braking)
- Output Frequency is Not as High as Frequency Reference
- Sound from Motor
- Motor Does Not Restart after Power Loss
- Periodic Inspection & Maintenance
- Section Safety
- Inspection
- Periodic Maintenance
- Drive Cooling Fans
- Number of Cooling Fans
- Cooling Fan Component Names
- Cooling Fan Replacement: 2A0018 to 2A0081, 4A0007 to 4A0044, and 5A0006 to 5A0032
- Cooling Fan Replacement: 2A0110, 2A0138, 4A0058, 4A0072, 5A0041, and 5A0052
- Cooling Fan Replacement: 4A0088 and 4A0103
- Cooling Fan Replacement: 2A0169 to 2A0415, 4A0139 to 4A0362, and 5A0062 to 5A0242
- Cooling Fan Replacement: 4A0414
- Cooling Fan Replacement: 4A0515 and 4A0675
- Cooling Fan Replacement: 4A0930 and 4A1200
- Drive Replacement
- Peripheral Devices & Options
- Section Safety
- Drive Options and Peripheral Devices
- Connecting Peripheral Devices
- Option Installation
- Installing Peripheral Devices
- Dynamic Braking Options
- Installing a Molded Case Circuit Breaker (MCCB) or Ground Fault Circuit Interrupter (GFCI)
- Installing a Magnetic Contactor at the Power Supply Side
- Connecting an AC Reactor or DC Link Choke
- Connecting a Surge Absorber
- Connecting a Noise Filter
- Installing Input Fuses
- Attachment for External Heatsink Mounting
- Installing a Motor Thermal Overload (oL) Relay on the Drive Output
- Specifications
- Power Ratings
- Three-Phase 200 V Class Drive Models 2A0004 to 2A0030
- Three-Phase 200 V Class Drive Models 2A0040 to 2A0211
- Three-Phase 200 V Class Drive Models 2A0250 to 2A0415
- Three-Phase 400 V Class Drive Models 4A0002 to 4A0031
- Three-Phase 400 V Class Drive Models 4A0038 to 4A0165
- Three-Phase 400 V Class Drive Models 4A0208 to 4A1200
- Three-Phase 600 V Class Drive Models 5A0003 to 5A0032
- Three-Phase 600 V Class Drive Models 5A0041 to 5A0099
- Three-Phase 600 V Class Drive Models 5A0125 to 5A0242
- Drive Specifications
- Drive Watt Loss Data
- Drive Derating Data
- Power Ratings
- Parameter List
- Understanding Parameter Descriptions
- A: Initialization Parameters
- b: Application
- C: Tuning
- d: References
- E: Motor Parameters
- H Parameters: Multi-Function Terminals
- L: Protection Function
- n: Special Adjustment
- o: Operator-Related Settings
- S: Special Application
- T: Motor Tuning
- U: Monitors
- V/f Pattern Default Values
- Defaults by Drive Model
- MEMOBUS/Modbus Communications
- Standards Compliance
- Quick Reference Sheet