Casio XJ-A142 User Guide - Manual (Page 19)

19
To copy files from a computer to projector internal memory
Note
z This procedure is supported on a computer running one of the operating systems below.
Windows: XP, Vista, 7, 8, 8.1 (Logged in with admin privileges)
Mac OS: 10.6, 10.7, 10.8, 10.9 (Logged in with a root account or user account)
1.
Press the [MENU] key to display the setup menu.
2.
Use the [
T] key to select “Multimedia Settings”, and then press the [ENTER] key.
3.
Use the [
T] key to select “Internal Storage Function”, and then press the
[ENTER] key.
4.
When the “Turns off the projector to use internal storage.” message appears,
press the [ENTER] key.
z This will cause projector power to turn off. The POWER/STANDBY indicator will light amber
and the TEMP indicator will light red.
5.
Press the projector’s [P] (Power) key to turn on power.
z The POWER/STANDBY indicator will light green and the TEMP indicator will light red. This
indicates that the projector’s internal storage function is operational. You will not be able to
project images with the projector at this time.
6.
If the computer has a USB flash drive or any other removable media connected,
disconnect it.
7.
Use a commercially available USB cable to connect the projector’s USB-B port
(Micro USB B type) to your computer’s USB port.
z The location of the USB-B port of this projector is indicated by “* 2 ” in the illustration under
“Connecting Projector Cables” (page 11).
z When you do, projector internal memory will be recognized by your computer as removable
disk drive named “InternalMem”.
8.
On the computer, open the “InternalMem” drive.
9.
Copy the file(s) you want to project to the “InternalMem” drive.
Windows:
When the “AutoPlay” dialog box appears on your computer screen, click “Open folder to view
files”. If the “AutoPlay” dialog box does not appear, perform the following operation: [Start] 3
[Computer] 3 Double-click “InternalMem”.
Mac OS:
An “InternalMem” drive icon will appear on the Mac desktop. Double-click to open it.