Casio XJ-A142 User Guide - Manual (Page 60)

60
Option Settings 1 3
Password See “Password Protection” (page 62).
Option Settings 1 3
Direct Power On Enable (On) and disable (Off *) projector auto power on as soon as the projector’s AC
adapter is plugged into a power outlet.
Option Settings 1 3
Language Specify the display language.
English, French, German, Italian, Spanish, Swedish, Portuguese, Dutch, Norwegian,
Polish, Finnish, Czech, Turkish, Russian, Chinese (Simplified), Chinese (Traditional),
Korean, Japanese, Thai, Indonesian, Malay, Vietnamese, Lithuanian
Important!
z USB Model Users
When using certain USB model functions, some menus and messages may
be displayed in English, regardless of the language selected here.
Option Settings 1 3
Restore Menu Defaults Return all of the items in the “Option Settings 1” main menu to their initial defaults for
the currently projecting image source.
Option Settings 2 3
Zoom Memory
(XJ-A Series only) Specify whether the projector should remember the current zoom (projected image
size) setting when you press the [P] (Power) key to turn off projector power.
Select “On
*” to have the projector remember the current zoom setting when the [P]
(Power) is pressed to turn off power and restore it the next time power is turned on.
Option Settings 2 3
Plug and Play Specify whether the projector input source should switch automatically (Plug and
Play: On
*) when a supported external USB device is connected to the projector’s
USB-A port.
Note
z Regardless of the setting of this item, plug-and-play is disabled while the
projector is in the 3D input mode. See “3D Input Mode (XJ-M Series Only)”
on page 16 for information.
Option Settings 2 3
Audio Out Use this sub-menu to specify whether audio input from the input sources below
should be output to the speaker (Speaker
*) or output to an external destination
(Line) * 1 .
z File Viewer (Movie playback audio)
z Wireless or Network (Video stream projection movie audio)
z USB Display
z HDMI
*1 When Line is specified, an XJ-A Series projector will output audio from its AV
terminal, while an XJ-M Series projector will output from its AUDIO OUT terminal.
Option Settings 2 3
High Altitude Turn the high-altitude fan speed setting on or off in accordance with the altitude of
the area where you are using the projector.
On: Select this setting when using the projector in a high altitude (1,500 to
3,000 meters / 5,000 to 10,000 feet above sea level) area where air is thin. This
setting increases cooling efficiency.
Off *: Select this setting at normal altitudes (up to 1,500 meters / 5,000 feet).
Important!
z Do not use this projector at altitudes greater than 3,000 meters (10,000 feet)
above sea level.
Option Settings 2 3
Control Panel Lock Disable projector unit key operations.
See “Control Panel Lock” (page 65) for more information.
Use this menu item: To do this: