Troubleshooting, Indicators – Casio XJ-A142 User Guide User Manual
Page 67
67
Troubleshooting
Indicators keep you informed about the current operational status of the projector. The following
shows what the indicators look like when operation is normal.
When a warning message appears on the projection screen, or when the POWER/STANDBY, LIGHT,
and TEMP indicators are lit or flashing in a pattern other than those shown above, it means that a
projector error has occurred. For details, see “Error Indicators and Warning Messages” (below).
Indicators
When the indicators appear
like this:
It means this:
POWER/
STANDBY
LIGHT
TEMP
You have just plugged the AC power cord into a power outlet. Wait
until the projector enters the standby state (see below) before trying
to turn on power.
z
z
z
Red
Amber
Amber
z
c
c
Standby state: The AC power cord is plugged in and the projector is
in standby.
Red
z
z
Projector is warming up after being turned on.
Green
Amber
Amber
z
c
c
Projector is on and standing by for use.
“Off” is selected for the projector’s Eco Mode (page 53) setting.
Green
z
z
c
Projector is on and standing by for use.
“On (Auto)” or “On (Manual)” is selected for the projector’s Eco Mode
(page 53) setting.
Green
Green
c
c
Projector is performing internal power down processes.
Red
z
: Lit
: Flashing
c
: Unlit