Configuring camera sound settings (sounds), Time stamping snapshots (timestamp) – Casio EX-TR35 User Manual

Page 106

Advertising
background image

106

Other Settings (Set Up)

Procedure

MENU * Setup * Sounds

• Setting a volume level of 0 mutes output.

Procedure

MENU * Setup * Timestamp

You can configure the camera to stamp the recording date only, or date and time in
the lower right corner of each snapshot.

• Once date and time information is stamped into a snapshot, it cannot be edited or

deleted.

Example: July 10, 2015, 1:25 p.m.

• Even if you do not stamp the date and/or time with Timestamp, you can do so later

using some printing application.

• Stamping is performed in accordance with the date and time settings (page 108)

and the display style settings (page 108).

Configuring Camera Sound Settings (Sounds)

Startup

Toggles the operation tone between on and off.

Half Shutter

Shutter

Operation

Volume

Operation
Vol

Specifies the sound volume. This volume setting is also
used during video output (from the HDMI port) (page 73).

Playback
Vol

Specifies the volume of movie audio output. This volume
setting is also used during video output (from the HDMI
port) (page 73).

Posing Vol

Specifies the volume of Posing Shot voice guidance.
Voice guidance is output in accordance with this setting
even if “Off” is selected for the “Shutter” operation tone
setting.

Time Stamping Snapshots (Timestamp)

Date

2015/7/10

Date & Time

2015/7/10 1:25pm

Off

No stamping of date and/or time

Advertising
This manual is related to the following products: