Casio EX-TR35 - Manual (Page 88)

88
Establishing a Wireless LAN Connection
You can use Quick Send to send a snapshot you just recorded with the camera to a
smartphone. After sending an image to a smartphone, you can then upload it to a
social networking service.
• Note that you will not be able to use Quick Send to send a snapshot to a
smartphone if you performed any one of the operations below after recording the
snapshot.
– Exiting the REC mode to the PLAY mode or turning off the camera
– Resetting the camera (page 111) or formatting camera memory (page 111)
– Selecting Remote Capture
– Performing a movie recording operation
1.
On the smartphone, start up EXILIM Remote. In the
upper right corner of the screen that appears, tap
“Setting”.
2.
If you plan to upload the image to a social
networking service after sending it to the
smartphone, turn “Send to SNS” on. Otherwise,
turn it off.
3.
On the camera, enter the REC mode and shoot the
snapshot.
4.
Touch the “ ” (Quick Send) icon.
5.
Touch “Send”.
6.
On your smartphone, start up the EXILIM Remote app.
This will establish a connection between your camera and the smartphone, and
send the snapshot you just recorded to the smartphone.
• If the message “Connect your phone to the access point below.” remains on
the camera’s monitor screen, change the smartphone’s Wi-Fi settings so your
camera is selected for connection (page 86).
Sending a Just-recorded Snapshot to a Smartphone
(Quick Send)