Enterasys Networks VHSIM2-A6DP - Manual (Page 102)

VHSIM2-A6DP LEDs
4-2 LANVIEW LEDs
Table 4-1 VHSIM2-A6DP LEDs
LED Color Definition
Off None No activity.
TX
(Transmit) Green
(Flashing) Cells being transmitted.
RX
(Receive) Green
(Flashing) Cells being received.
NOTE: All APIMs and VAPIMs share the same LEDs.
Table 4-2 APIM LEDs
LED Color Definition
LNK
(Link) Green
(Solid)
Off
Have link.
No link.
STS
(Status) Green
(Solid) APIM OK.
Red (Solid) Fault with media. In most cases, the APIM automatically
corrects this condition without interrupting operations. If the
LED is red and remains red, contact Enterasys Networks.
Refer to
Section 1.2 .
Red
(Blinking) APIM should be replaced. The APIM will still function, but
packet switching performance may be affected. If the APIM
goes into this LED state, contact Enterasys Networks. Refer
to
Section 1.1 .