Enterasys Networks VHSIM2-A6DP - Manual (Page 84)

LEC Properties Screen
3-50 Local Management
LEC STATE (Read-Only)
Displays the current state that the LEC is in. The possible states are as follows:
• Initial State
• LECS Connect
• Configure
• Join
• Initial Registration
• BUS Connect
• Operational
Status (Read-Only)
Displays the current status of the LEC. This field displays one of the following items:
• Active (LEC is operational)
• Not In Service (LEC is not operational)
• No Link (No connection to the network)
• No ATM Address (ILMI not operating, refer to Section 3.17 )
• No UNI (UNI not operating, refer to Section 3.17 )
ELAN ID (Read-Only)
Displays the ID that this ELAN was assigned by the LES.
LANE Version (Read-Only)
Displays the LANE version that the LEC is using. This field will display 1.0 or 2.0.
LEC ATM ADDR (Read-Only)
Displays the ATM Address of the LEC.
LECS ATM ADDR (Read-Only)
Displays the ATM address of the LAN Emulation Configuration Server. If this LEC was
configured manually, this field can be empty.
LES ATM ADDR (Read-Only)
Displays the ATM Address of the LAN Emulation Server to which the LEC is connected.
BUS ATM ADDR (Read-Only)
Displays the ATM address of the Broadcast or Unknown Server to which the LEC is connected.
Section 3.12 provides definitions for the possible states of the LEC State field.