3 setting the active port, 4 setting the activation of redundant port field, 5 setting the revert to primary port field – Enterasys Networks VHSIM2-A6DP User Manual
Page 68: Setting the active port -34, Setting the activation of redundant port field -34, Setting the revert to primary port field -34
ATM Port Redundancy Configuration Screen
3-34
Local Management
3.10.3 Setting the Active Port
To set the Active port, perform the following steps:
1.
Use the arrow keys to highlight the Active port field.
2.
Enter 1 or 2. Entering 1 signifies APIM 1 of the VHSIM2-A6DP. Entering 2 signifies APIM 2
of the VHSIM2-A6DP.
3.
Use the arrow keys to highlight the SAVE command at the bottom of the screen and press
ENTER. The changes are saved to memory.
3.10.4 Setting the Activation of Redundant Port Field
To set the Activation of redundant port field (automatic or manual), perform the following steps:
1.
Use the arrow keys to highlight the Activation of redundant port field.
2.
Press the SPACE bar to toggle between the choices until the appropriate mode displays
(Automatic or Manual).
3.
Use the arrow keys to highlight the SAVE command at the bottom of the screen and press
ENTER. The changes are saved to memory.
3.10.5 Setting the Revert to Primary Port Field
To set the Revert to Primary port field (Automatic or Manual), perform the following steps:
1.
Use the arrow keys to highlight the Revert to Primary port field.
2.
Press the SPACE bar to toggle between the choices until the appropriate mode displays
(Automatic or Manual).
NOTE: This field may be configured manually to “1” or “2”, however, it is possible this
value may change if the Activation of redundant port or Revert to primary port fields are
set to “Automatic”.
NOTE: If the Activation of redundant port field is set to Manual, the redundant port must
be activated by the user via Local/Remote Management.