8 using the test ports now command, 9 using the reset to factory defaults command, 11 lan emulation clients screen – Enterasys Networks VHSIM2-A6DP User Manual
Page 70: Using the test ports now command -36, Using the reset to factory defaults command -36, Lan emulation clients screen -36, Section 3.11
LAN Emulation Clients Screen
3-36
Local Management
3.10.8 Using the TEST PORTS NOW Command
To force the VHSIM2-A6DP to perform a redundancy test immediately, perform the following
steps:
1.
Use the arrow keys to highlight the TEST PORTS NOW command.
2.
Press ENTER. The VHSIM2-A6DP performs the redundancy test, and displays the results in
the Port Usability/Status field.
3.10.9 Using the RESET TO FACTORY DEFAULTS Command
To reset all the values of the ATM Port Redundancy Configuration screen to the factory default
values, perform the following steps:
1.
Use the arrow keys to highlight the RESET TO FACTORY DEFAULTS command.
2.
Press ENTER. All configurable options on this screen are reset to their default values.
3.11 LAN EMULATION CLIENTS SCREEN
The LAN Emulation Clients screen contains five menu items that open Local Management screens
used to create, maintain, and monitor LAN Emulation Clients (LECs). It also may be used to
search the ARP cache for specific MAC addresses.
To access the LAN Emulation Clients screen from the ATM screen, perform the following steps:
1.
Use the arrow keys to highlight the LAN EMULATION CLIENTS menu item.
2.
Press ENTER. The LAN Emulation Clients screen,
, displays.