Enterasys Networks VHSIM2-A6DP - Manual (Page 72)

LEC Table Screen
3-38 Local Management
LEC TRANSMIT QUEUES
This menu item opens the Traffic Management LEC Priority Queues screen. This screen is used to
assign 802.1P priorities to a LEC.
Refer to Section 3.16 .
3.12 LEC TABLE SCREEN
The LEC Table screen is a read-only screen that is used to view the status of all LECs currently
configured on the VHSIM2-A6DP.
To access the LEC Table screen from the LAN Emulation Clients screen, perform the following
steps:
1. Use the arrow keys to highlight the LEC TABLE menu item on the LAN Emulation Clients
screen.
2. Press ENTER. The LEC Table screen, Figure 3-14 , displays.
Figure 3-14 LEC Table Screen
The following list explains each of the LEC Table screen fields:
IF (Read-Only)
Displays the MIB-II Interface that this LEC has been assigned dynamically. The value assigned to
this field is necessary when using the ATM Connection Setup by Virtual Interface screen
(
Section 3.7 ).
RETURN EXIT
IF Port Index LEC ID Ver ELAN ID ELAN Name LEC State
25 29 1 0 2.0 0 Ctron1 Operational
All values correspond with the lecStatusTable of the ATM Forum LEC MIB.
2825_19