Enterasys Networks VHSIM2-A6DP - Manual (Page 48)

Traffic Management PVC Priority Assignments
3-14 Local Management
3.5 TRAFFIC MANAGEMENT PVC PRIORITY ASSIGNMENTS
The Traffic Management PVC Priority Assignments screen is only accessible if the operational
mode of the board is 802.1Q Switching. If the board is in SecureFast mode, the Add/Delete Entry
screen used for configuring PVCs will be displayed, instead of the Traffic Management PVC
Priority Assignments screen.
The Traffic Management PVC Priority Assignments screen allows up to eight VPI, VCI, Traffic
descriptor groups to be assigned to one Virtual Port when the board is in 802.1Q SWITCHING
MODE. Each of the VPI, VCI, Traffic descriptor groups in the Virtual Port will be assigned to a
specific virtual queue. If the board is in SecureFast mode, the user will be limited to creating only
one PVC per Virtual Port.
To enter the Traffic Management PVC Priority Assignments screen, go to the CONNECTION
TABLE screen (ATM CONNECTION SETUP screen) and choose the ADD/DELETE option.
The Traffic Management PVC Priority Assignments Screen displays. See Figure 3-6 .
Figure 3-6 Traffic Management PVC Priority Assignments Screen
PVC Vport: [ NEW VPORT: 32 ]
Number of Virtual Queues: [ 1 ]
AAL Type: [ 5 ]
Encapsulation Type: [ VC Mux 802.3 Bdg ]
Virtual Profile Profile Traffic
Queue VPI VCI Index Name Category
0 [ 1 ] Default UBR descriptor UBR
SAVE EXIT RETURN
28251_39