Enterasys Networks VHSIM2-A6DP - Manual (Page 45)

ATM Connection Setup Screen
Local Management 3-11
CONNECTIONS BY VIRTUAL INTERFACE
This menu item, when selected, opens the ATM Connection Setup by Virtual Interface screen. This
screen is used to view all current connections (PVCs and SVCs) on an interface-by-interface basis.
Refer to
Section 3.7 .
3.4 ATM CONNECTION SETUP SCREEN
The ATM Connection Setup screen is used to view the current configured virtual connections,
(PVCs and SVCs) on the VHSIM2-A6DP. This screen also allows the user to access the
Add/Delete Entry screen, which is used to create, modify, or delete PVCs.
To access the ATM Connection Setup screen from the ATM Connections screen, perform the
following steps:
1. Use the arrow keys to highlight the CONNECTION TABLE menu item on the ATM
Connections screen.
2. Press ENTER. The ATM Connection Setup screen, Figure 3-5 , displays.
Figure 3-5 ATM Connection Setup Screen
NOTE: The first two connections shown in Figure 3-5 (with VPI, VCI values of 0, 5 and
0, 16 respectively) represent UNI and ILMI. These two connections, even if they are
disabled in the Signalling screen (
Section 3.17 ), will always display on the ATM
Connection Setup screen.
RETURN ADD/DELETE PREVIOUS NEXT EXIT
Total Bandwidth Available: 155 Mbps
ATM Port Current Connections: 30 [Page 1 of 4]
PORT
0
0
1
1
1
1
1
1
28252_12
ATM Address (ESI)
00-00-1D-XX-XX-XX
00-00-1D-XX-XX-XX
00-00-1D-XX-XX-XX
00-00-1D-XX-XX-XX
00-00-1D-XX-XX-XX
00-00-1D-XX-XX-XX
155 Mbs
155 Mbs
155 Mbs
155 Mbs
155 Mbs
155 Mbs
155 Mbs
155 Mbs
RATE IF
25
25
31
32
34
36
38
40
Encapsulation Type
UNI
ILMI
LANE Control
LANE Control
LANE Control
LANE Control
LANE Control
VC Mux 802.3 Bdg
VPI
0
0
0
0
0
0
0
0
VCI
5
16
25
26
998
999
1000
1001
1
1
1
1
1
1
1
1
INDEX
UBR
UBR
UBR
UBR
UBR
UBR
UBR
UBR
TRAFFIC
CATEGORY