Enterasys Networks VHSIM2-A6DP - Manual (Page 83)

LEC Properties Screen
Local Management 3-49
Figure 3-16 LEC Properties Screen
The following list explains each of the LEC Properties screen fields:
LEC Index (Selectable)
Used to identify this LEC both on the VHSIM2-A6DP and in the ATM Forum’s LEC MIB.
LEC ID (Read-Only)
Displays the LAN Emulation Client Identifier assigned to this LEC by the LAN Emulation Server
when the LEC was created. If the LEC ID field reads “0”, it signifies that this LEC is not a member
of an emulated LAN, and is not connected to a LAN Emulation Server.
Actual ELAN Name (Read-Only)
Displays the name of the ELAN to which this LEC belongs.
RETURN
0x00.0000.00.000000.0000.0000.0000.000000000000.00
LEC Index: 1
LEC ID: 0 LEC STATE: InitialState
Status: notinservice
Actual ELAN Name:
LEC ATM ADDR:
LECS ATM ADDR:
LES ATM ADDR:
BUS ATM ADDR:
0x00.0000.00.000000.0000.0000.0000.000000000000.00
0x00.0000.00.000000.0000.0000.0000.000000000000.00
0x00.0000.00.000000.0000.0000.0000.000000000000.00
LECS Configuration Direct VCC: 0, 0
LES Control Direct VCC: 0, 0
LES Control Distribute VCC: 0, 0
BUS Default Multicast Send VCC: 0, 0
BUS Default Multicast Forward VCC: 0, 0
EXIT
LANE Version: [2.0]
All values correspond with
the lecStatusTable of the
ATM Forum LANE 2.0 MIB.
ELAN ID: 0
2825_21