Enterasys Networks VHSIM2-A6DP - Manual (Page 43)

Accessing the VHSIM2-A6DP ATM Screen
Local Management 3-9
PHYSICAL PORT CONFIGURATION
This menu item displays the Physical Port Configuration Menu screen. This screen provides two
menu items that allow the user to configure the physical ports of the VHSIM2-A6DP. For details,
refer to
Section 3.8 .
LAN EMULATION CLIENTS
This menu item displays the ATM LEC screen. This screen contains multiple options for
performing tasks related to the creation and maintenance of LAN Emulation Clients (LECs) and
Emulated LANs (ELANs). For details, refer to
Section 3.11 .
SIGNALLING
This menu item opens the Signalling screen. This screen is used to view the current version of
User-Network Interface (UNI) being used by the VHSIM2-A6DP, the current state of the
Integrated Local Management Interface (ILMI) and provides the options of restarting the UNI and
the ILMI. For details, refer to
Section 3.17 .
TRAFFIC MANAGEMENT
This menu item opens the Traffic Management Descriptor Profiles screen. This screen is used to
create a new traffic descriptor, give it a name, select a traffic category, and designate the traffic rate
for the new traffic descriptor. For details, refer to
Section 3.18 .
DISCOVERY ELAN SETUP
This menu item opens the Discovery ELAN Setup screen, only when the operational mode is set to
SecureFast. This screen is used to enable or disable the default ELAN that is created when the
VHSIM2-A6DP is first initialized in SecureFast mode. This screen also is used to enable or disable
any additional discovery ELANs (up to 16) that the VHSIM2-A6DP will belong to on the
SecureFast network. For details, refer to
Section 3.19 .
NOTE: The Add/Delete Entry screen will display only if the host device has been set
to operate as a SecureFast switch. Refer to the Local Management chapter of the host
device for instructions on configuring the host device for this type of operation.
NOTE: The DISCOVERY ELAN SETUP menu item will display only if the host device
has been set to operate as a SecureFast switch. Refer to the Local Management
chapter of the host device for instructions on configuring the host device for this type of
operation.