Enterasys Networks VHSIM2-A6DP - Manual (Page 20)

Overview
1-2 Introduction
1.1.1 ATM Port Interface Modules (APIMs and VAPIMs)
The VHSIM2-A6DP supports two Enterasys Networks APIMs for ATM connectivity and
redundancy. APIMs for any interface can be installed into the VHSIM2-A6DP. The two APIMs
installed may be of any combination of physical layer cable type and bandwidth. For example, the
APIM installed in slot 1 could support Twisted Pair cable and provide 155 Mbps of bandwidth,
while the APIM installed in slot 2 could support Coaxial cable and provide 45 Mbps of bandwidth.
Appendix B details all of the APIMs and VAPIMs available for the VHSIM2-A6DP.
1.1.2 MIB Support
For additional information on how to extract and compile individual MIBs, refer to the Release
Notes, or contact Enterasys Networks for technical support. Refer to
Section 1.2 for details.
1.1.3 LANVIEW Diagnostic LEDs
Enterasys Networks provides a visual diagnostic and monitoring system called LANVIEW. The
VHSIM2-A6DP LANVIEW LEDs help to quickly identify transmit/receive and link status.