Edelbrock 2010 User Manual
Page 20
©2013 Edelbrock LLC
Part #1596, 1597, 1598, 1599
Brochure #63-1598
Rev. 3/25/13 - QT/mc
Edelbrock E-Force Supercharger System for
the 2010-2013 Camaro SS
Installation Instructions
Page 19
101. Mount the brackets, supplied in Bag #2, to the
intercooler reservoir with the M6 x 16mm bolts located in
Bag #2. Refer to figures 2a & 2b for the specific orientation
of the lower bracket for each model year.
2010-’11
Figure - 2a
Figure - 1
2012-’13
Figure - 2b
102.
FOR 2010-‘11 MODEL YEARS ONLY Use a 10mm
socket to remove the upper-outside bolt from the back-
passenger side of the radiator fan; retain the bolt as it will
be re-used.
103.
FOR 2012-‘13 MODEL YEARS ONLY Use a 13mm
wrench to install the standoff stud supplied in Bag #2 in
place of the bolt which was just removed. See Figure 3a.
2010-’11
Figure - 3a
104.
FOR 2012 - ‘13 MODEL YEARS ONLY Use a 10mm
wrench to install the standoff, supplied in Bag #2, to the
stud located on the back of the radiator fan. See Figure 3b
2012-’13
Figure - 3b