Changing the frames – Epson PhotoPC L-410 User Manual
Page 62
62
Using PRINT Image Framer (P.I.F.)
Note:
When you want to select a frame stored in the memory card, press the r button after pressing the
P.I.F. button.
3.
Select the desired frame by using the u d buttons, then press the OK button.
4.
The selected frame is displayed on the LCD monitor. You can now take the photograph.
Changing the Frames
You can change the frames after you take a photo in the P.I.F. mode. You can also add a frame to
a photo that was taken without a frame.
1.
Turn the camera on, then turn the Mode dial to
playback mode.
2.
Display the desired photo to change or add a frame, then press the
P.I.F. button. The
Camera in Frame screen is displayed.
3.
Select a frame by using the u d buttons, then press the OK button.
Note:
To save the photo with no frame, select No Frame.