TA Triumph-Adler P-C3570DN - Manual (Page 144)

Using the Operation Panel 4-71
Protocol Detail (Detailed settings for the network protocol)
This selects the settings for Protocol Detail.
1
In the TCP/IP Settings menu, press  or  to select Protocol
Detail.
2
Press [OK]. The Protocol Detail menu screen appears.
3
Press  or  to select the item for which you want to make settings.
4
Press [OK]. This displays the setting screen for the item selected in
step 3.
The screen shown is the one when NetBEUI is selected.
5
Press  or  to select On or Off.
6
Press [OK]. The Protocol Detail menu reappears.
Item Description
Default
Setting Restarting
the System
†
†. : The machine must be restarted after the setting is changed.
×: The machine does not need to be restarted after the setting is
changed.
NetBEUI Selects whether or not to
receive documents using
NetBEUI. On ×
SNMPv3 Set SNMPv3. Off 
FTP (Server) Select whether or not to
receive documents using FTP.
On 
SNMP Select whether or not to
communicate using SNMP. On 
SMTP Select whether or not to send
e-mail using SMTP. Off ×
POP3 Select whether or not to
receive e-mail using POP3. Off ×
RAW Port Select whether or not to
communicate using RAW Port. On 
LPD Select whether or not to
receive documents using LPD
as the network protocol. On 
HTTP Select whether or not to
communicate using HTTP. On 
Protocol Detail: a b
1 NetBEUI
2 SNMPv3
3 FTP(Server)
[ Exit ]
NetBEUI: a b
1 Off
2 *On