TA Triumph-Adler P-C3570DN - Manual (Page 174)

Using the Operation Panel 4-101
SSL Setting (SSL Server setting)
SSL (Secure Sockets Layer) refers to a protocol used to encrypt
information sent and received over a network. SSL can currently be used
to encrypt data such as the WWW or FTP files widely used on the Internet
so that privacy-related information, credit card numbers, corporate
secrets and other confidential information can be sent and received
safely.
SSL servers use this protocol to authenticate servers and clients.
The options available in SSL Setting are as follows:
• SSL (SSL Server setting)
• IPP over SSL (SSL Server IPP over SSL setting)
• HTTPS (SSL Server HTTPS setting)
1
In the Network Security menu, press  or  to select SSL Setting.
2
Press [OK]. The SSL Setting menu screen appears.
SSL (SSL Server setting)
Select the SSL server settings.
The options available in SSL are as follows:
• Off/On (SSL operation setting)
• Encryption (Encryption setting)
1
In the SSL Setting menu, press  or  to select SSL.
2
Press [OK]. The SSL menu screen appears.
Off/On (SSL operation setting)
Select whether or not to use the SSL server. The default setting is Off.
1
In the SSL menu, press  or  to select Off/On.
2
Press [OK]. The Off/On screen appears.
3
Press  or  to select whether to use the SSL server.
SSL Setting: a b
1 SSL
2 IPP over SSL
3 HTTPS
[ Exit ]
SSL: a b
1 Off/On
2 *Encryption
[ Exit ]
Off/On: a b
1 *Off
2 On