TA Triumph-Adler CX 8682 - Manual (Page 33)

CHAPTER 4 BASIC COPYING
4-9
7. Canceling Copying
The method for canceling copying varies with the situation.
Use the proper procedure in accordance with the situation.
Situation Operation
To stop immediately scanning: Press the Scan Stop key. Scanning of original will stop. Open the original cover and
remove the original.
To stop scanning of original in the sort copy mode: Press the Stop/Clear key.
To stop immediately output of paper while the copy
is being output: (to cut the paper at some midpoint) Press the Roll Cut key.
To stop output of paper while the copy is being
output: (to stop after ejecting the paper in progress) Press the Stop/Clear key.
To cancel a reserved job: Press the Add Job key for more than two seconds. A screen for deleting reserved jobs will
appear. Delete the desired job referring to “2. Canceling job reserve”. (Page 6-8)
To cancel reserved repeat copy: Press the Repeat Copy key.