TA Triumph-Adler DC 2020 - Manual (Page 25)

CHAPTER 4 BASIC OPERATION
When copying ends, press the Interrupt key again, and
replace the newly copied original(s) with the one(s) removed
before. Then, press the Start key.
The interrupted copy job will be resumed. Interrupt copying is useful if, during one copy job, other originals need
to be copied at different settings. The interrupted copy job can be
resumed at the same settings as before after the rush job is finished.
Press the Interrupt key to light the indicator.
The “INTERRUPT MODE.” screen will appear.
Remove the present original(s) and put it (them) aside.
Set the new original(s) and execute copying.
3. Interrupt copying
4-6
1
2
3
4