TA Triumph-Adler DC 2020 - Manual (Page 58)

CHAPTER 7 OPTIONAL EQUIPMENT
7-3
(2) RADF (Reversing Auto Document Feeder)
The RADF automatically feeds one-sided originals one by one for
scanning. It also reverses two-sided originals automatically for duplex
copying and page separation copying. For details, see the RADF's
instruction handbook.
(3) Drawer
Up to two drawers of the same type as that in the main body can be
added.
Capacity and the paper loading method is the same as those for the
standard drawer in the main unit.
* Paper misfed in the optional cassette can be removed by opening its
left cover.
(4) Finisher
The finisher stores a large quantity of copies. It can also sorts multiple
copies into sets by shifting the eject position. Paginated copies can be
stapled, too.
(5) Duplex unit
If the Duplex unit is installed, duplex copies can be made. Duplex
copies can be made with A3 to A5 (vertical) [17" x 11" to 5 1/2" x 8 1/
2"] (75 to 80 g/m
2 ) paper.
(6) Job separator
When using the optional printer function, the paper eject point can be
changed according to the used function, making it easier to sort
paper.
Copies are ejected onto the lower section (copy store section), and
printouts are ejected onto the upper section. These ejection points
can also be specified.
(7) Key counter
The key counter determines the number of copies that have been
made. It is useful for copier centralized management on a department
or even company level.