TA Triumph-Adler DC 2020 - Manual (Page 5)

1 2
4 5 6
7 8 9
10 11 12
3
Having the machine automatically select
paper of the same size as the original
<Auto paper selection mode>
(page 4-1) Various functions for making enlarged
and reduced copies
■ Enlarging/reducing copies to fit the
size of paper in a specified drawer
<Auto magnification selection mode>
(page 4-4)
■ Enlarging/reducing copies to any
desired size in the 50 - 200% range.
<Zoom copy mode> (page 4-4)
■ Specifying the magnification by selecting
the paper size
<Size zoom mode> (page 4-5)
■ Selecting the zoom ratio with one
touch
<Standard zoom mode> (page 4-5)
Making clear reproductions of photo-
graphs
<Copy quality selection> (page 4-2)
Making a margin on copies
<Margin mode> (page 5-5) Making copies with clean edges
<Border erase mode> (page 5-6) Making one copy from two or four
originals
<Layout copy> (page 5-7)
Copying two-page originals as separate
pages
<Page separation copy mode>
(page 5-4) Duplex copying from various originals
<Duplex copy> (page 5-1)
* When optional duplex unit is installed. Sorting automatically
<Sort copy> (page 5-9)
Changing copy orientation for easy
sorting
<Rotate sort copy mode> (page 5-9) Making copies from originals of different
sizes at a time
<Auto selection> (page 5-10)
* When optional ADF or RADF is
installed.
Managing the number of copies by ID-
code
<Copy management> (page 6-1)
ii
● MAKING FULL USE OF THE MACHINE’S ADVANCED FUNCTIONS