TA Triumph-Adler DC 2020 - Manual (Page 47)

CHAPTER 6 COPIER MANAGEMENT
Press the enter key.
Make settings as explained below.
NOTE
• (>) displayed in each setting screen indicates the present setting
value.
• After finishing each setting, the display will return to the screen in
step 5. If changing other settings, repeat step 5 to 7.
Press the cursor up key to select “END” and press the enter
key to finish settings. The message display will return to the
“READY TO COPY.” screen.
1 EXPOSURE MODE
Press the cursor down or up key to select “AUTO”, “MIXED”,
“PHOTO” or “TEXT”.
Press the enter key.
2 EXPOSURE STEPS
Press the cursor down or up key to select “5 STEPS” or
“9 STEPS”.
Press the enter key.
(2) How to set the copy default setting mode
Press the * /Language key to light the indicator.
The management mode selection screen will appear.
Press the cursor down key to select “COPY DEFAULT”.
Press the enter key.
Enter the management code “2000” with the numeric keys.
NOTE
• The 4-digit management code can be changed. (See “ @ MANAGE-
MENT CODE CHANGE” on page 6-18.)
Press the cursor down or up key to select the copy default
setting to be changed. See “(1) Copy default settings” on
page 6-9 for settings that can be changed.
1
2
3
4
5
6
8
1
2
1
2
7
6-11