TA Triumph-Adler DC 2325 - Manual (Page 201)

System Menu
ADVANCED OPERATION GUIDE 6-33
6
4 Press [+] or [–] to
enter the form
density.
5 Press [Select Form].
6 Select the Box where the Form is stored and press [Open].
NOTE: Press [Detail] to check Box No., Box Name, Usage Restriction,
Owner, Permission and Auto File Deletion.
7 Select the Form that
you want to use and
press [OK].
NOTE: Press [Detail] to check File Name, Storing Size (Document size),
Data Size, Pages, Scan Resolution, Color/Monochrome, Data Size, and
Date Stored in the Form.
8 Press [OK].
EcoPrint
Select the EcoPrint default. The table below shows the available settings.
NOTE: Refer to page 1-44 for EcoPrint.
Common Settings - Form Overlay(Box)
Set the default form overlay for box print jobs .
Select
Stored Form
Density(10 - 100)
100
Off
Cancel OK
Status 10/10/2007 10:10
%
None
Select Form
Owner Use(%) Name
Common Settings - Select Form
001/200
Cancel
Preview
BOX1
OK
Open
Select a form.
No.
001 BOX101 anonymous 10%
002 BOX102 anonymous 10%
003 BOX103 anonymous 5%
004 BOX104 anonymous 5%
005 BOX105 anonymous 5%
Detail
Item Description
Off No EcoPrint performed.
On EcoPrint performed.