TA Triumph-Adler DC 2325 - Manual (Page 249)

System Menu
ADVANCED OPERATION GUIDE 6-81
6
The Folder (SMB) Address
1 Press [Host Name], [Path], [Login User Name], and [Login
Password] to enter relevant information respectively and press [OK].
The table below explains the items to be entered.
* If you specify a port number other than the default (139), use the
“ Host name: port number ” format. (E.g. SMBhostname:140)
** Use single-byte alphanumeric characters to specify the path. If you
use Japanese (double-byte) characters, transmission will fail.
NOTE: Refer to the Operation Guide for entering characters.
2 Check if the entries are correct and press [OK].
NOTE: Press [Connection Test] to check the connection to the computer
you chose. If the connection fails, check the entries you made.
11 Check if the destination entry is correct and press [Register]. The
destination is added to the Address Book.
Item Description
Max. No. of
Characters
Host name* Host name or IP address of the
sending computer 62 chars
Path** Path to the folder used to save
files
E.g.
“ \User\ScanData ”
126 chars
Login user
name User name for folder access
For example,
abcdnet\james.smith 62 chars
Login
password Password for folder access 62 chars
Address - Folder Path Entry
SMB
OK
Status 10/10/2007 10:10
Cancel
FTP
Host Name
Path
Login
User Name
Login
Password
Connection
Test