TA Triumph-Adler DC 2325 - Manual (Page 219)

System Menu
ADVANCED OPERATION GUIDE 6-51
6
Duplex
Select binding orientation for duplex mode. The table below shows the
available settings.
Use the procedure below to select the interface.
1 Press the System Menu key.
2 Press [Printer] and [Change] of Duplex.
3 Press [1-sided],
[2-sided Bind
LongEdge], or
[2-sided Bind
ShortEdge].
4 Press [OK].
Copies
Set the default number of copies, from 1 to 999.
Use the procedure below to select the interface.
1 Press the System Menu key.
2 Press [Printer] and [Change] of Copies.
Item Description Finish
1-sided No duplex mode
2-sided Bind
ShortEdge Shorter edge
bound
2-sided Bind
LongEdge Longer edge
bound
Printer - Duplex
Cancel OK
Status 10/10/2007 10:10
Set the default duplex mode .
2-sided
Bind LongEdge 1-sided 2-sided
Bind ShortEdge