TA Triumph-Adler DC 2325 - Manual (Page 221)

System Menu
ADVANCED OPERATION GUIDE 6-53
6
Wide A4
Increase the number of characters per line for A4 paper.
Use the procedure below to specify the Wide A4 setting.
1 Press the System Menu key.
2 Press [Printer] and [Change] of Wide A4.
3 Press [Off] or [On].
4 Press [OK].
Form Feed Timeout
Receiving print data from the computer, the machine may sometimes wait
if there is no information signalling that the last page does not have any
more data to be printed. When the preset timeout passes, the machine
automatically prints paper. The options are between 5 and 495 seconds.
Use the procedure below to set the form feed timeout.
1 Press the System Menu key.
2 Press [Printer], [T] and [Change] of Form Feed Timeout.
3 Press [+] or [–] to set
the Form Feed
Timeout.
You can set the
timeout delay in
seconds.
You cannot use the
number keypad to
enter this value.
4 Press [OK].
Printer - Wide A4
Cancel OK
Status 10/10/2007 10:10
Enlarge the print area for A4 paper .
On Off
Printer - Form Feed Timeout
Cancel OK
Status 10/5/2006 10:10
Set the amount of time to wait from the last transmission
before automatic form feed is initiat
ed.
sec.
(5 - 495)
30