TA Triumph-Adler DC 2325 - Manual (Page 264)

Management
7-6 ADVANCED OPERATION GUIDE
1 Log in as a user with administrator rights.
2 Press the System Menu key.
3 Press [User Login/Job Accounting].
4 If user login is disabled, the user authentication screen appears. Enter your
login user name and password and then press [Login]. For this, you need
to log in with administrator privileges. The default login user name and
password are both
“ 3060 ” .
5 Press [Next] of User Login Setting, [Register/Edit] of Local User List, and
then [Add].
6 Press [Change] of
User Name.
7 Enter the user name and press [OK].
NOTE: Refer to the Operation Guide for details on entering characters.
8 Enter the login user name and E-mail address following 6 and 7 above.
9 Press [Change] of Login Password and then [Password].
10 Enter the login password and press [OK].
11 Press [Confirm Password].
12 Enter the same login password to confirm and press [OK].
13 Press [Change] of Access Level.
User:**
User Name:
Account Name: Access Level:
Register
Status 10/10/2007 10:10
E-mail Address:
Login Password Login User Name:
Cancel
User0099
Account02 User
[email protected]
******** 0099
Change
Change
Detail Change
Change
Detail