TA Triumph-Adler DC 2325 - Manual (Page 67)

Copying Functions
ADVANCED OPERATION GUIDE 1-53
1
Priority Override
Suspends a current job and gives the selected job priority for copying. The
suspended job resumes after Priority Override copying is finished.
NOTE: The current job that is selected as Priority Override cannot be
suspended.
The procedure for using Priority Override is explained below.
1 Place the originals on the platen.
2 Press the Copy key.
3 Press [Advanced Setup] and then [Priority Override].
4 Press [On] to select
Priority Override.
5 Press [OK].
6 Press the Start key. The current copy job is suspended and the copy job
selected in Priority Override starts. The suspended job resumes after
Priority Override copying is finished.
Status 10/10/2007 10:10
Ready to copy. Copies
Cancel OK
Priority Override
Press [OK] to display
Add Shortcut
Off
Give print job top priority and complete it
before returning to other print jobs .
On
1
the image.