Amprobe DM-4 Power-Quality-Recorder - Manual (Page 12)

In order to display the voltage waveform or harmonics for the monitored phase,
click on Scope or Harm buttons. The waveform or the harmonics table for the
monitored voltage phase will be displayed.
How to Monitor Current Only?
From the Voltage and Current screen, click on the Current button. You will be
prompted to the current only real time display. The RMS value for the monitored
phase will be reported with its respective frequency.
In order to display the current waveform or the harmonics for the monitored
phase, click on Scope or Harm buttons. The waveform graph or the harmonics
table for the monitored Current phase will be displayed.
11
DM-4 Power Quality Recorder
Real Time Voltage
Harm 1 0.00
Harm 3 0.00
Harm 5 0.00
Harm 7 0.00
Back
V1
Close
Real Time Harmonics
1 0.00
3 0.00
5 0.00
7 0.00
Back
Ø1
Real Time (Current)
Cur
(A) 0.00
Freq
(Hz) 0.00
Back Harm Scope
Ø1
Voltage & Current
V1: 116.13V __ l1: 3.96A
Back Voltage Current Power
Click
Current
Real Time Mode
Close
P Voltage 1
P
Current 1
Real Time Mode