Amprobe DM-4 Power-Quality-Recorder - Manual (Page 17)

5.1.1 How to Set the Date and Time?
When connecting to the data logger, if the date and time of the device are different
from the Remote User Interface (PDA), the program will ask you if you would like
to synchronize the data logger with the Remote User Interface (PDA). Click on YES
to set the date and time manually or automatically. Click on NO to continue to use
the device. Important!!! (If you do not set the device time correctly, the auto-
matic recording will not take place.)
NOTE. You can also use the Download Suite program to set the date and time in
the device.
5.2 DEFAULT SETTINGS: ANALYZER CONFIG
The basic setting allows you to quickly set the device for a recording session with
all the 456 parameters selected.
16
DM-4 Power Quality Recorder
Connecting
If you are using serial port, make sure
that the device is connecting using
appropriate cable.
Wrong Settings
The data logger’s date and
time are not in sync with the
Palm. Do you want to
change the settings
Yes No
v
Set Time
Synchronize time with Palm’s clock
Palm Time: 10/3/05 2:27pm
Set time manually
Set Date: 10/3/05
Set Time: 2:27pm
Done
Y
Device Status
Record @ undefined
Device time 10/3/05 2:29 pm
Battery 100%
Memory 0%
F/W ver 1.0b3
Set
Back
Click Done
to accept
the change
Click Yes
to change
the settings