Amprobe AMB-110 Insulation-Resistance-Tester - Manual (Page 28)

23
Step Voltage Insulation Resistance testing
Selecting this function displays the following states (initial state and state with results after the
completion of the measurement). The Fig. 20 shows states when Graph R(t) is disabled.
Initial display Display with results
Fig. 20 Step Voltage function display states - Graph R(t) enabled
The Fig.21 shows states when Graph R(t) is enabled. When Graph R(t) is enabled you can simple
switching initial state and state with results after the completion of the measurement, between
numericaland graphical mode with pressing or keys.
graphical mode
numerical mode
Note
• It is not possible to switching mode of presentation when measurement running!!!
Initial display -
numerical mode
Initial display -
graphical mode
Display with results -
numerical mode
Display with results -
graphical mode
g
Fig. 21 Step Voltage function display states - Graph R(t) enabled