PLANET FGSW-2620CS - Manual (Page 22)

User’s Manual of FGSW-2620CS
• System Up Time The period of time the device has been operational.
• Idle Time Security
Set idle time and behavior.
Table 4-2 Descriptions of the System Information Web Page Screen Objects
4.2.2 IP Configuration
This section provides change the IP Address, Subnet Mask and Gateway, the screen in Figure 4-5 appears.
Figure 4-5 IP Configuration Web Page Screen
The page includes the following fields:
Object Description
IP Address
Assign the IP address that the network is using.
If DHCP client function is enabled, this switch is configured as a DHCP
client. The network DHCP server will assign the IP address to the switch
and display it in this column.
The default IP is 192.168.0.100 or the user has to assign an IP address
manually when DHCP Client is disabled.
Subnet Mask
Assign the subnet mask to the IP address.
If DHCP client function is disabled, the user has to assign the subnet
mask in this column field.
The default subnet mask is 255.255.255.0.
Gateway
Assign the network gateway for the switch.
If DHCP client function is disabled, the user has to assign the gateway in
this column field.
The default gateway is 192.168.0.254.
IP Configure
Select static IP address or DHCP client function
When DHCP function is enabled, the Web Smart Switch will be assigned
an IP address from the network DHCP server. The default IP address will
be replaced by the assigned IP address on DHCP server. After the user
clicks Apply, a popup dialog shows up to inform the user that when the
DHCP client is enabled, the current IP will lose and user should find the
new IP on the DHCP server.
Table 4-3 Descriptions of the IP Configuration Web Page Screen Objects
- 22 -