PLANET FGSW-2620CS - Manual (Page 51)

User’s Manual of FGSW-2620CS
Default link group 3 is included P25, P26.
• State
Allow disable or enable port trunk from Web Smart Switch, the available
options are Enable and Disable. Default mode is Disable.
• Type
Allow to selects port trunk type from Web Smart Switch, the available
options are LACP and Static. Default mode is LACP.
• Operation Key The LACP operation key must be set to the same value for ports that
belong to the same LAG.
Range: 1-65535;
Default Link Group 1: 1
Default Link Group 2: 2
Default Link Group 3: 3
• Time Out The time out configuration mode command assigns an administrative
LACP timeout. To reset the default administrative LACP timeout use the
no form of this command
, the available options are shown as below:
Long Time Out
Short Time Out
Default mode is Short Time Out.
• Activity
Allow link group to automatically sends LACP protocol packets or not.
Default mode is Passive.
Table 4-17 Descriptions of the Trunk Setting Screen Objects
4.6 QoS Setting
This function provides QoS Setting of Web Smart Switch; the screen in Figure 4-38 appears and Table 4-18 descriptions
the QoS Setting of Web Smart Switch.
Figure 4-38 QoS Setting Web Page Screen
- 51 -