PLANET FGSW-2620CS User Manual
Page 50
User’s Manual of FGSW-2620CS
Trunk Setting
This function allows to configuring the trunk function. It provides up to two trunk groups and each trunk group provides 4
member ports. Also provide four various Trunk Hash Algorithm policies for selection. The screen in
Figure 4-37
appears
and
Table 4-17
description the Trunk Setting objects of Web Smart Switch.
Figure 4-37 Trunk Setting Web Page Screen
The page includes the following fields:
Object
Description
• System Priority
A value which is used to identify the active LACP. The Managed Switch with the
lowest value has the highest priority and is selected as the active LACP peer of
the trunk group.
• Link Aggregation
Algorithm
Provide different algorithm method of link aggregation, the available options are
shown as below:
MAC Src&Dst
MAC Source
Default mode is MAC Src&Dst.
• Member
Allow to click specific port as member port from different link groups.
Default link group 1 is included P1, P2, P3, P4.
Default link group 2 is included P5, P6, P7, P8.
- 50 -