PLANET WGS3-24000 - Manual (Page 285)

285
4.7.3.3 DVMRP Configuration Summary
Figure 4-6-64 DVMRP Configuration Summary
Selection Criteria
o Slot/Port - Select the interface for which data is to be displayed. You must configure at least one router interface
before you can display data for a DVMRP interface. Otherwise you will see a message telling you that no router
interfaces are available, and the configuration summary screen will not be displayed.
Non-Configurable Data
o Interface Mode - The administrative mode of the selected DVMRP routing interface, either enable or disable.