3 configuration – PLANET WGS3-24000 User Manual
Page 39
39
4.2.3 Configuration
Use this page to configure the parameters for system management, including the following fields:
。
System Description
。
Switch
。
Network Connectivity
。
Telnet Session
。
Outbound Telnet Client Configuration
。
Serial Port
。
User Account
。
Authentication List Configuration
。
Login Session
。
Authentication List Summary
。
User Login
4.2.3.1 System Description
This page shows the basic system information and is available to define the system name, location and contact person.
Includes the following fields:
。
System Name -
Enter the name you want to use to identify this switch. You may use up to 31 alpha-numeric
characters. The factory default is blank.
。
System Location -
Enter the location of this switch. You may use up to 31 alpha-numeric characters. The factory
default is blank.
。
System Contact -
Enter the contact person for this switch. You may use up to 31 alpha-numeric characters. The
factory default is blank.
。
System Description -
The product name of this switch.
。
System Object ID -
The base object ID for the switch's enterprise MIB.
。
System IP Address -
The IP Address assigned to the network interface.
。
System Up time -
The time in days, hours and minutes since the last switch reboot.
。
MIBs Supported -
The list of MIBs supported by the management agent running on this switch.