PLANET WGS3-24000 User Manual
Page 69
69
4.2.8.3 Port Detailed
Selection Criteria
。
Slot.Port -
Selects the interface for which data is to be displayed or configured.
Non-Configurable Data
。
ifIndex -
This object indicates the ifIndex of the interface table entry associated with this port on an adapter.
。
Packets RX and TX 64 Octets -
The total number of packets (including bad packets) received or transmitted that
were 64 octets in length (excluding framing bits but including FCS octets).
。
Packets RX and TX 65-127 Octets -
The total number of packets (including bad packets) received or transmitted
that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).
。
Packets RX and TX 128-255 Octets -
The total number of packets (including bad packets) received or transmitted
that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).
。
Packets RX and TX 256-511 Octets -
The total number of packets (including bad packets) received or transmitted
that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).
。
Packets RX and TX 512-1023 Octets -
The total number of packets (including bad packets) received or
transmitted that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS
octets).
。
Packets RX and TX 1024-1518 Octets -
The total number of packets (including bad packets) received or
transmitted that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS
octets).
。
Packets RX and TX 1519-1522 Octets -
The total number of packets (including bad packets) received or
transmitted that were between 1519 and 1522 octets in length inclusive (excluding framing bits but including FCS
octets).
。
Packets RX and TX 1523-2047 Octets -
The total number of packets (including bad packets) received or
transmitted that were between 1523 and 2047 octets in length inclusive (excluding framing bits but including FCS
octets).
。
Packets RX and TX 2048-4095 Octets -
The total number of packets (including bad packets) received or
transmitted that were between 2048 and 4095 octets in length inclusive (excluding framing bits but including FCS
octets).
。
Packets RX and TX 4096-9216 Octets -
The total number of packets (including bad packets) received or
transmitted that were between 4096 and 9216 octets in length inclusive (excluding framing bits but including FCS
octets).
。
Octets Received -
The total number of octets of data (including those in bad packets) received on the network
(excluding framing bits but including FCS octets). This object can be used as a reasonable estimate of Ethernet
utilization. If greater precision is desired, the etherStatsPkts and etherStatsOctets objects should be sampled
before and after a common interval.
。
Packets Received > 1522 Octets -
The total number of packets received that were longer than 1522 octets
(excluding framing bits, but including FCS octets) and were otherwise well formed.
。
Total Packets Received Without Errors -
The total number of packets received that were without errors.
。
Unicast Packets Received -
The number of subnetwork-unicast packets delivered to a higher-layer protocol.
。
Multicast Packets Received -
The total number of good packets received that were directed to a multicast