PLANET WGS3-24000 User Manual

Page 71

Advertising
background image

71

。

Total Packets Transmitted (Octets) -

The total number of octets of data (including those in bad packets)

transmitted on the network (excluding framing bits but including FCS octets). This object can be used as a

reasonable estimate of Ethernet utilization. If greater precision is desired, the etherStatsPkts and etherStatsOctets

objects should be sampled before and after a common interval.

。

Packets Transmitted 1523-2047 Octets -

The total number of packets (including bad packets) received that were

between 1523 and 2047 octets in length inclusive (excluding framing bits but including FCS octets).

。

Packets Transmitted 2048-4095 Octets -

The total number of packets (including bad packets) received that were

between 2048 and 4095 octets in length inclusive (excluding framing bits but including FCS octets).

。

Packets Transmitted 4096-9216 Octets -

The total number of packets (including bad packets) received that were

between 4096 and 9216 octets in length inclusive (excluding framing bits but including FCS octets).

。

Maximum Frame Size -

The maximum Ethernet frame size the interface supports or is configured, including

Ethernet header, CRC, and payload. (1518 to 1600). The default maximum frame size is 1518.

。

Total Packets Transmitted Successfully -

The number of frames that have been transmitted by this port to its

segment.

。

Unicast Packets Transmitted -

The total number of packets that higher-level protocols requested be transmitted

to a subnetwork-unicast address, including those that were discarded or not sent.

。

Multicast Packets Transmitted -

The total number of packets that higher-level protocols requested be transmitted

to a Multicast address, including those that were discarded or not sent.

。

Broadcast Packets Transmitted -

The total number of packets that higher-level protocols requested be

transmitted to the Broadcast address, including those that were discarded or not sent.

。

Total Transmit Errors -

The sum of Single, Multiple, and Excessive Collisions.

。

Tx FCS Errors -

The total number of packets transmitted that had a length (excluding framing bits, but including

FCS octets) of between 64 and 1518 octets, inclusive, but had a bad Frame Check Sequence (FCS) with an

integral number of octets

。

Tx Oversized -

The total number of frames that exceeded the max permitted frame size. This counter has a max

increment rate of 815 counts per sec at 10 Mb/s.

。

Underrun Errors -

The total number of frames discarded because the transmit FIFO buffer became empty during

frame transmission.

。

Total Transmit Packets Discarded -

The sum of single collision frames discarded, multiple collision frames

discarded, and excessive frames discarded.

。

Single Collision Frames -

A count of the number of successfully transmitted frames on a particular interface for

which transmission is inhibited by exactly one collision.

。

Multiple Collision Frames -

A count of the number of successfully transmitted frames on a particular interface for

which transmission is inhibited by more than one collision.

。

Excessive Collision Frames -

A count of frames for which transmission on a particular interface fails due to

excessive collisions.

。

Port Membership Discards -

The number of frames discarded on egress for this port due to egress filtering being

enabled.

。

STP BPDUs Received -

Number of STP BPDUs received at the selected port.

。

STP BPDUs Transmitted -

Number of STP BPDUs transmitted from the selected port.

Advertising
This manual is related to the following products: