PLANET ISW-504PS - Manual (Page 14)

User’s Manual
Figure 2-2 Reset button of Industrial PoE Switch
1. Press the RESET button once. The Industrial PoE Switch will reboot automatically.
2. Press the RESET button for 5 seconds. The Industrial PoE Switch will back to the factory
default mode; the entire configuration will be erased.
2.1.3 LED Indicators
„ System
LED Color Function
P1 Green Indicate the power 1 has power.
P2 Green I ndicate the power 2 has power.
Fault Green I ndicate the either power 1 or power 2 has no power.
„ Per 10/100Base-TX Port
LED Color Function
Light
Indicate the link through that port is successfully
established at 10 or 100Mbps.
LNK / ACT Green
Blink
I ndicate that the Switch is actively sending or receiving
data over that port.
„ Per 100Base-FX Port
LED Color Function
Light
Indicate the link through that port is successfully established
at 10 or 100Mbps.
LNK/ ACT Green
Blink
Indicate that the Switch is actively sending or receiving data
over that port.
-14 -