PLANET ISW-504PS - Manual (Page 31)

User’s Manual
4.3 System
The System function allows viewing System information, IP Configuration, Password Setting and etc.
As shown in Figure 4-3 and description on Table 4-3
Figure 4-3 System Screen
The page includes the following information:
Object Description
System Information Display the MAC address, Software Version, Hardware Version, IP address, Subnet
Mask and Gateway.
Explained in section 4.3.1
IP Configuration Allow to change the IP subnet address of Switch. Explained in section 4.3.2
Password Setting Allow to change the username and password of Switch. Explained in section 4.3.3
Firmware Upgrade Allow proceed firmware upgrade process of Switch. Explained in section 4.3.4
Configuration Setting Allow to restore / backup configuration of Switch and reset Switch to factory default.
Explained in section 4.3.
Configuration Backup Allow to download / upload the configuration file of Switch. Explained in section 4.3.6
Managed IP Allow to set the specific IP address to access the Web Smart Page. Explained in
section 4.3.7
Fault Relay Alarm Monitor the Power 1 and 2. Explained in section 4.3.8
Alert Trap Configuration Set up SNMP trap receiver’s IP address and trap event. Explained in section 4.3.9
System Reboot Allow reboot the Switch. Explained in section 4.3.10
Table 4-3 Descriptions of the System Column
-31 -